EyeToy: Groove PS2 Setup and Play Guide
By The Game Collection | Published: 2026-10-26
Category: How-to Guides
Learn how to set up and play EyeToy: Groove on your PlayStation 2. Step-by-step instructions for camera placement, calibration, and dance tips.
Quick answer
To play EyeToy: Groove on PS2, connect the EyeToy camera to a USB port, position it on top of your TV at eye level, and calibrate your movements in the game's setup menu.
Why camera placement matters
The EyeToy camera tracks your full-body movements, so its position directly affects how well the game registers your dance steps. Placing it too high or too low can cause missed cues or false readings.
Aim for the camera to be centered on your TV, at about chest height when you're standing in your play area. This gives the lens a clear view of your upper body and arms, which is what the game primarily tracks.
Lighting and background tips
The EyeToy works best in a well-lit room, but avoid direct sunlight on the lens. Too much backlight (e.g., a window behind you) can wash out your silhouette and confuse the motion detection.
Stand at least 3-4 feet away from the camera. If you're too close, the game may not see your full body; too far, and the camera might pick up background movement that throws off the tracking.
Step-by-step setup and play guide
- Connect the EyeToy camera: Plug the EyeToy's USB cable into any available USB port on your PlayStation 2. The console will recognize it automatically; no driver installation is needed. Use the front USB port for easiest access, but a rear port works too.
- Position the camera on your TV: Place the EyeToy on top of your TV, centered horizontally, with the lens facing you. Adjust the tilt so the camera points slightly downward toward your play area. Avoid placing it below the TV — the camera may not capture your full body.
- Set up your play space: Stand about 4-6 feet away from the TV. Make sure there is enough room to move your arms and step side to side without hitting furniture. Remove any clutter behind you that could distract the camera. A clear background helps the camera track only you.
- Launch EyeToy: Groove and calibrate: Insert the game disc and start it. From the main menu, select 'Options' then 'Camera Setup.' Follow the on-screen instructions to adjust the camera angle and brightness until your silhouette is clearly outlined. If your silhouette looks fuzzy or has holes, adjust lighting or move closer to the camera.
- Start dancing: Choose a song from the track list. The game will show on-screen cues (arrows and shapes) that tell you which direction to move. Match the beat and keep your movements big enough for the camera to see. Sloppy or small movements may cause the game to miss your cues and end your turn early.
About the game
- EyeToy: Groove (PS2): EyeToy: Groove includes 26 tracks from artists like Junior Senior, Madonna, Fatboy Slim, and Elvis. The varied soundtrack keeps each session fresh, but the game relies on your physical movement rather than button inputs, so camera setup is key to enjoying the full track list.
EyeToy: Groove (PS2)
